Low voltage disconnector max. 40A PT40 ALFATRONIX

169,95

Includes 21% Tax

In stock

Warranty: 2 Years

The PowerTector Battery Guard is a solid state battery device that will monitor the source voltage and disconnect the equipment from the battery if the voltage falls below a pre-determined level. This can work to ensure that there is always sufficient voltage remaining in the battery to start a vehicle engine or ensure power is available for other critical applications. The total discharge of a lead acid battery can also cause damage to the cells significantly shortening the life of the battery. The PowerTector unit can also be set to disconnect equipment at a lower voltage that will still protect the battery from total discharge, while allowing for maximum battery usage. A timed version is also available which will disconnect automatically a set period after the ignition has been switched off.

Specifications
Voltage in: 9-32
Regulation: Yes
Alarm voltage: Yes
Shut down voltage: Yes
Overloading: Yes
Overheating: Yes
Short circuit: Yes
Dimensions in mm: 76 x 78 x 33
Weight kg: 0.155
Amp max/cont: 40
Connection: M6
Shut down/12 V: 11.5
Shut down/24 V: 23

200A continuous

44A 110% 10s
40A 200% 1s
120A 300% <0.5ms

Product ID: 27053

Description


Manual 

There are six units in the range offering power options from 10A to 200A. All units are rated IP65 and come complete with up to 10 pre-programmed configurations to suit all likely battery protection requirements. The PT40 (40A) and PT60 (60A) units offer additional information inputs and outputs including on/off terminal, warning light/buzzer and programming. The PT100 (100A) and PT200 (200A) units offer in addition a manual override switch to re-connect short term power if required..

Reviews

There are no reviews yet.

Show only reviews in English (0)

Be the first to review “Low voltage disconnector max. 40A PT40 ALFATRONIX”
Project! AB Marine service

Your email address will not be published. Required fields are marked *