{"id":463182,"date":"2026-10-14T16:44:08","date_gmt":"2026-10-14T14:44:08","guid":{"rendered":"https:\/\/ab-marineservice.com\/?post_type=product&p=463182"},"modified":"2026-10-20T17:37:52","modified_gmt":"2026-10-20T15:37:52","slug":"sole-diesel-impeller-kit-for-short-pump-mini-50-55-62","status":"publish","type":"product","link":"https:\/\/ab-marineservice.com\/en\/product\/sole-diesel-impeller-kit-for-short-pump-mini-50-55-62\/","title":{"rendered":"Sol\u00e9 Diesel impeller kit for short pump Mini-50\/55\/62"},"content":{"rendered":"

Sol\u00e9 Diesel impeller kit for short pump Mini-50\/55\/62<\/h3>\n

This Sol\u00e9 Diesel impeller kit is intended for maintenance of the seawater pump on Mini-50, Mini-55 and suitable Mini-62 marine diesel engines. The kit is used with the short version of the water pump.<\/p>\n

The flexible rubber impeller rotates inside the pump housing and ensures that seawater is drawn in and pumped through the cooling system. This seawater removes heat from the internal engine cooling system via the heat exchanger.<\/p>\n

Technical specifications<\/h4>\n

Brand:<\/strong> Sol\u00e9 Diesel
\nProduct type:<\/strong> Impeller service kit
\nPart number:<\/strong> 22.35111008R
\nVersion:<\/strong> For short seawater pump
\nApplication:<\/strong> Seawater cooling system<\/p>\n

Contents of the kit<\/h4>\n

Impeller:<\/strong> Flexible rubber impeller for the seawater pump
\nGasket:<\/strong> Matching cover gasket for resealing the pump<\/p>\n

Suitable for Sol\u00e9 Diesel engines<\/h4>\n

This impeller kit is used on the following Sol\u00e9 Diesel marine diesel engines:<\/p>\n

Sol\u00e9 Mini-50
\nSol\u00e9 Mini-55
\nSol\u00e9 Mini-62 – only version with short water pump<\/p>\n

Please note for the Mini-62<\/h4>\n

For the Sol\u00e9 Mini-62, the version of the installed seawater pump is decisive. This kit is only suitable for engines with the short water pump. Therefore, check the installed pump or the part number of the existing impeller before ordering.<\/p>\n

Function of the impeller<\/h4>\n

The rubber blades of the impeller are continuously bent inside the pump housing while rotating. This creates suction and pressure chambers that move seawater through the cooling system.<\/p>\n

Sufficient cooling water flow is essential for dissipating engine heat. If the impeller pumps insufficient water, cooling capacity may decrease and the engine temperature can rise quickly.<\/p>\n

Why should an impeller be checked regularly?<\/h4>\n

An impeller is a wear part. The rubber is continuously deformed during operation and is also exposed to water, heat and periods of inactivity. Over time, this can cause the blades to harden, crack or become permanently deformed.<\/p>\n

If a blade breaks off, pump capacity decreases and pieces of rubber may be carried further into the cooling system. These pieces can, for example, accumulate in pipes or the heat exchanger and restrict cooling water flow.<\/p>\n

Possible signs of a worn impeller<\/h4>\n

Reduced cooling water discharge:<\/strong> Less cooling water from the exhaust than normal
\nHigher engine temperature:<\/strong> Engine runs hotter than usual
\nDamaged blades:<\/strong> Cracks, missing sections or permanent deformation
\nHardened rubber:<\/strong> The impeller feels stiff or dried out<\/p>\n

Preventive maintenance<\/h4>\n

Check the impeller at least during periodic engine maintenance and replace it preventively when the condition of the rubber is no longer good. With seasonal use, the impeller is often checked or replaced annually.<\/p>\n

During replacement, also check the pump housing and cover plate for wear. If parts of the old impeller are missing, they should be removed from the rest of the cooling circuit where possible before the engine is used again.<\/p>\n

Installation<\/h4>\n

Install the impeller according to Sol\u00e9 Diesel specifications and fit the new cover gasket correctly. After installation, check that the pump is leak-free and that sufficient seawater is pumped through the cooling system immediately after starting.<\/p>\n

Do not allow a rubber impeller to run dry. Without water, the impeller can be damaged in a short time.<\/p>\n

Useful as a spare part on board<\/h4>\n

An impeller is an important spare part to keep on board. If the impeller fails, the cooling water supply may decrease significantly or stop completely. With a suitable spare kit, the seawater pump can be restored more quickly while underway.<\/p>\n","protected":false},"excerpt":{"rendered":"

The Sol\u00e9 Diesel impeller kit is a maintenance kit for the seawater pump of the Sol\u00e9 Mini-50, Mini-55 and certain Mini-62 marine diesel engines. The flexible rubber impeller supplies seawater through the cooling system so that engine heat can be dissipated via the heat exchanger.<\/p>\n

This version is intended for engines with the short seawater pump. For the Mini-62, it is therefore important to check which water pump is installed on the engine before ordering. An incorrect impeller may not fit properly in the pump housing.<\/p>\n

A worn or damaged impeller may pump less cooling water and can eventually lose blades. This can reduce cooling water flow and cause the engine to overheat. Regular inspection and preventive replacement are therefore an important part of engine maintenance.<\/p>\n

Main features and benefits<\/h4>\n

Product type:<\/strong> Impeller service kit
\nVersion:<\/strong> For short seawater pump
\nSuitable for:<\/strong> Sol\u00e9 Diesel Mini-50\/55\/62
\nMini-62:<\/strong> Only versions with short water pump
\nContents:<\/strong> Impeller and matching cover gasket
\nApplication:<\/strong> Seawater pump of the engine cooling system
\nFunction:<\/strong> Supplies seawater through the cooling system
\nMaintenance:<\/strong> Check regularly and replace preventively<\/p>\n","protected":false},"featured_media":463184,"comment_status":"open","ping_status":"closed","template":"","meta":[],"location":[],"product_brand":[32173],"product_cat":[2585,22115,32170],"product_tag":[],"class_list":["post-463182","product","type-product","status-publish","has-post-thumbnail","product_brand-sole","product_cat-engine-parts","product_cat-parts-by-brand","product_cat-sole-engine-parts","first","instock","sale","taxable","shipping-taxable","purchasable","product-type-simple"],"group_of_quantity":0,"min_quantity":0,"max_quantity":"","exclude_order_quantity_value_rules":"no","exclude_category_quantity_rules":"no","combine_variations":"no","locations":[{"id":3905,"name":"AB Marine","slug":"ab-marine-service","quantity":""},{"id":15420,"name":"Allpa","slug":"allpa","quantity":""}],"_links":{"self":[{"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/product\/463182","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/comments?post=463182"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/media\/463184"}],"wp:attachment":[{"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/media?parent=463182"}],"wp:term":[{"taxonomy":"location","embeddable":true,"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/location?post=463182"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/product_brand?post=463182"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/product_cat?post=463182"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/ab-marineservice.com\/en\/wp-json\/wp\/v2\/product_tag?post=463182"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}