This impeller pump is the replacement for your Westerbeke cooling water pump.
\nThis pump is suitable for use as a motor cooling water pump, but can also serve as a deck wash pump, bilge pump, general service or bilge pump.
\nThe pump is self-priming due to the rubber impeller.
\nThis impeller pump has a particularly long service life because the stainless steel shaft is located in a permanently lubricated bearing.<\/p>\n
This pump is suitable for both pleasure and commercial shipping.<\/p>\n
Pump must not run dry, the liquid running through the pump provides the cooling.
\nIf the pump were to run without liquid, the impeller would harden due to the friction heat. As a result, the impeller blades break off and the pump no longer draws suction.<\/p>\n
Product information and specifications: This pump replaces the following OEM numbers:<\/p>\n Westerbeke <\/strong>uses this pump on the following generators and marine engines:<\/p>\n 4.2 BCG low profile – 50 Hz, 5.0 BCG – 50 Hz, 5.0 BCG low profile<\/strong> Used on the following Northern Lights marine engines: M864K, M864W, M864W3, M964, M984K, M984W<\/strong><\/p>\n
\nUses JMP Impeller p\/n: 7000-01K<\/strong><\/a>
\nPort type: 3\/8″ NPT<\/strong><\/a>
\nPump weight (approx.): 1.05KG<\/strong><\/p>\n\n
\n5.8 BCGD low profile – 50 Hz, 7.0 BCGD low profile<\/strong>
\n3,75 BCGTC – 50 Hz, 4,5 BCGTC, 6,0 BCGTC – 50 Hz, 7,2 BCGTC, 8,0 BCGTC – 50 Hz, 9,6 BCGTC<\/strong>
\n6,4 BEG – 50 Hz, 8,0 BEG – 50 Hz, 8.0 BEG – 60 Hz, 10.0 BEG – 50 Hz, 12.0 BEG – 50 Hz, 12.5 BEG, 15.0 BEG<\/strong>
\n4.2 MCG low-CO – 50 Hz, 5.0 MCG low-CO, 5.2 MCG low-CO – 50 Hz, 6.5 MCG low-CO<\/strong>
\n4.2 SBCG low-CO – 50 Hz, 5.0 SBCG low-CO, 5.4 SBCG low-CO – 50 Hz, 6.5 SBCG low-CO<\/strong>
\n6.4 SBEG low CO – 50 Hz, 10.0 SBEG – 50 Hz low CO, 10.0 SBEG – 60 Hz low CO, 11.6 SBEG low CO – 50 Hz, 12.5 SBEG low CO, 14.0 SBEG low CO<\/strong><\/p>\n