Description
Solé Diesel impeller for SV-230
This genuine Solé Diesel impeller is suitable for the seawater pump of the Solé Diesel SV-230 marine diesel engine. The impeller is an important component of the cooling system and ensures that seawater is drawn in and pumped through the cooling water circuit.
Reliable cooling water circulation is essential for dissipating the heat generated during engine operation. If the impeller becomes worn or damaged, the cooling water flow may decrease. This can lead to insufficient engine cooling and eventually overheating.
Technical specifications
Brand: Solé Diesel
Product type: Impeller
Application: Seawater pump of marine diesel engines
Function: Drawing in and circulating seawater
Maintenance: Periodic inspection and replacement according to the maintenance schedule
Suitable for Solé Diesel marine engines
This impeller is suitable for the following Solé Diesel marine diesel engine:
Suitable for:
Solé Diesel SV-230
Before ordering, check the exact engine type and installed seawater pump. The correct impeller depends on the pump version and must match the specified dimensions, hub connection and blade design.
How the impeller works
The impeller is located inside the seawater pump of the marine diesel engine. During rotation, the flexible blades are compressed and released by the shape of the pump housing. This creates a pumping action that draws in seawater and moves it through the cooling system.
The seawater drawn into the system helps dissipate heat from the engine. A properly functioning impeller is therefore important for cooling water circulation and preventing overheating.
If the blades become damaged or lose their flexibility, the pump may move less water. This can reduce cooling capacity and cause the engine temperature to rise too high.
When should the impeller be replaced?
An impeller is continuously subjected to mechanical stress during operation. The flexible blades move along the inside of the pump housing and are repeatedly compressed.
Wear, ageing, dry running or dirt inside the pump can damage the impeller. Regularly inspect it for the following signs:
Cracking: Cracks at the base or tips of the blades.
Broken blades: Missing or partially broken blades.
Deformation: Blades that remain bent or deformed.
Wear: Damaged or worn blade surfaces.
Reduced cooling water circulation: Insufficient water flow through the pump.
Replace the impeller if it is damaged or when replacement is required according to the Solé Diesel maintenance schedule. It is advisable to carry a suitable spare impeller on board during longer voyages ehttps://ab-marineservice.com/wp-admin/post.php?action=edit&post=463907#en.
Preventing damage caused by dry running
A flexible impeller relies on water for cooling and lubrication during operation. If the seawater pump runs without sufficient water supply, friction can quickly cause the blades to overheat and become damaged.
Dry running can occur, for example, when the seacock is closed, the water intake becomes blocked or the pump does not receive sufficient water.
Therefore, check that the seacock is open and the water supply is unobstructed before starting the engine. Do not allow the seawater pump to run dry.
Installation and maintenance
Before opening the seawater pump, close the seacock and ensure that the engine is switched off. Remove the pump cover according to the Solé Diesel maintenance instructions and take the existing impeller out of the pump housing.
Inspect the pump housing and pump cover for damage, wear and contamination. If the old impeller has damaged or missing blades, also check the cooling water circuit for any remaining rubber fragments.
Install the new impeller according to the manufacturer’s instructions. Check the pump cover seal and replace it if necessary.
After installation, open the seacock and check when starting the engine that the cooling water circulation is functioning correctly and that the seawater pump is not leaking.
Important considerations
The correct impeller is determined not only by the engine type but also by the installed seawater pump. Impellers can differ in diameter, width, number of blades and hub connection.
Therefore, check the specified impeller version before ordering. An impeller that looks similar is not automatically interchangeable with another version.
This product is the impeller for the Solé Diesel SV-230. Any pump cover gasket or other additional maintenance parts must be checked separately.




Reviews
There are no reviews yet.