Homokinetic Drives

Order your homokinetic drive from AB Marine Service. We supply a complete drive set for engines up to approximately 350 hp.

A drive set consists of:

  • Homokinetic drive shaft (homokinetic coupling)
  • Thrust bearing with clamping bush
  • Adapter and bolts
  • Nuts and lock washers for vibration-free travel

Go directly to:

Showing all 7 results

  • Flexible drive shaft HD-108 for engines up to ± 50 hp

    €629,95     Add to cart

  • Flexible drive shaft homokinetic HD-115L for engines up to ± 90 hp

    €879,95     Add to cart

  • Flexible drive shaft homokinetic HD-113 for engines up to ± 80 hp

    €719,95     Add to cart
  • Dit is de homokinetische tussen-as voor de Flexibele schroefas aandrijving type HD-108 tot ± 50 pk. Ter vervanging van je kapote homokineet.

    Homokinetic intermediate shaft for type HD-108 up to ± 50 hp

    €529,95     Add to cart

  • Homokinetic drive type HD-142 for engines up to ± 350 hp Flexible drive shaft

    €5.279,95     Add to cart

  • Homokinetic drive type HD-130 for engines up to ± 250 hp Flexible drive shaft

    €2.869,95     Add to cart

  • Homokinetic drive type HD-125 for engines up to ± 170 hp Flexible drive shaft

    €1.459,95     Add to cart

Complete homokinetic drive and clutch received

When ordering a chosen drive, please specify the following and receive the set:

  • Engine power and max speed
  • Brand
  • Type
  • Gearbox reduction
  • Protruding circle and centring edge of the output flange
  • Propeller shaft diameter

Characteristics of homokinetic drive and coupling

  • Up to 90% less noise and vibration production
  • Remarkable simplification of engine/reverse gear units
  • Alignment procedure is very easy due to self-aligning propeller shaft clamping hub in thrust bearing
  • Can accommodate alignment differences up to 2×8º
  • Variable-length drive shaft with two homokinetic couplings that can rotate even with uneven angles
  • Robust thrust bearing transfers the thrust of the propeller directly to the ship’s hull via damping plastic bushes and not to the engine. This allows you to apply softer vibration dampers.
  • Attachment of the cylindrical propeller shaft in the thrust bearing with a sturdy clamping bush.

Maximum installation angle homokinetic drive and coupling

Maximum installation angle of the homokinetic drive and coupling depends on the propeller shaft speed (rpm):

  • 8º angle per (homokinetic coupling – max 1200 rpm
  • 6º angle per homokinetic coupling – max 1500 rpm
  • 5º angle per homokinetic coupling – max 2000 rpm

Showing all 7 results