Adjustment pins

This type of adjustment pin is used for precise height adjustment and alignment of the propulsion engine or generator mounted on vibration dampers.
Other applications are, for example, an air-conditioning system, water maker/ pressure pump or other machine that causes vibrations, and where a vibration damper is an appropriate measure.

The adjustment pins are made of steel (class 8) and are electrolytically galvanised / dacromet. The adjustment pins are supplied with a washer. This washer should be placed between the cap of the vibration damper and the supplied half lower nut.
When assembling, make sure not to forget the washer. If you do not apply the washer, the cap of the vibration damper will be damaged!
The correct tightening torque for the fixing nuts must be observed during assembly!

Please note this when ordering the adjustment pins, not every vibration damper has the same metric thread.
You can choose between M12 or M16 and M12, M16 or M18 as height adjustment pin. If you want fine tuning, this is also possible.
Please note this when ordering the adjustment pins, not every vibration damper has the same metric thread.
You can choose between M12 or M16 and M12, M16 or M18 as height adjustment pin.