Adjustment pin M12/M12

Description

This type of adjustment pin M12/M12 is used for precise height adjustment and alignment of the propulsion engine or generator mounted on vibration dampers.
Other applications are, for example, an air-conditioning system, water maker/ pressure pump or other machine that causes vibrations.

The adjustment pins are made of steel (class 8) and are electrolytically galvanised / dacromet. The adjustment pins are supplied with a washer. This washer should be placed between the cap of the vibration damper and the supplied half/lower nut.
Pay attention when assembling that you do not forget the washer. If you do not apply the washer, the cap of the vibration damper will be damaged!
The correct tightening torque for the fixing nuts must be observed during assembly!

Please note this when ordering the adjustment pins, not every vibration damper has the same metric thread.
You can choose between M12 or M16 and M12, M16 or M18 as height adjustment pin. Do you want fine tuning? This is possible with the adjustment pin M12/M12 fine.

Buying the right engine mount:
Determining the right engine mount or vibration damper is a science in itself.
If you are satisfied with the damping of your old engine mounts and the engine mount in the webshop matches, you can easily select and order it.
If you do not have this information, we strongly recommend that you seek advice before ordering new engine mounts. This avoids disappointment and additional shipping costs.

Data required for the correct engine mounts:
The brand and type:
The weight of the engine:
The maximum number of revolutions:
Is a thrust bearing fitted:
The power of the engine:

For questions about this product, its parts or its type or application, please contact us.