Automatic Start Module DSE3110 for Generator or Engines

The DSE3110 can be used as a manual or automatic start module for single genset applications or for engine-only applications. The module is designed for use with non-electronic engines and provides advanced features for engine monitoring and protection.

The DSE3110 is equipped with a backlit LCD screen with icons that clearly display the genset status at all times. The module monitors the engine speed, frequency, voltage, and running hours of the engine and also shows warnings and shutdown statuses.

The module features fixed and configurable outputs as well as configurable inputs, making it suitable for a wide range of applications. The module can be programmed via the front panel or using the DSE Configuration Suite PC software.

Free programmable with free software: Software download DSE

• DC supply continuous voltage 8 to 35 volts
• Cranking dropouts 0 volts for 50 ms as long as the supply was at least 10 volts beforehand and recovers to at least 5 volts without internal battery
• Charge failure excitation 8 to 35 volts fixed current source 2.5 watts
• Nominal standby current 23 mA at 12 volts, 18 mA at 24 volts
• Maximum operating current 35 mA at 12 volts, 30 mA at 24 volts
• Output A fuel 2 A DC at supply voltage
• Output B start 2 A DC at supply voltage
• Outputs C and D 2 A DC at supply voltage
• Generator voltage range 15 to 333 volts AC
• Generator frequency range 3.5 to 75 Hz
• Magnetic pickup voltage range ±0.5 to 70 volts
• Magnetic pickup frequency range up to 10,000 Hz

Note: not CAN compatible.

Includes connectors.

Datasheet: