Micro Water Separator MFC1900 Water filter (max 600hp)

How does the Micro-Separator work?
The Micro-Separator makes use of a cleaning process based on two well-known principles: centrifugal force and coalescence; first the incoming fuel is forced into a rotary motion through conductor plates to the bottom compartment. In this first cleaning phase the speed of the fluid is brought back to a minimum and water drops and other heavier parts are separated from the fuel, without causing an emulsion The separated pollution and the water are collected at the bottom of the separator until these are drained.

In the secondary phase, the fuel runs through three ceramic elements, the “coalescor”. Eventual remainders of pollution and the water drops ‘unite’ in this phase and are fed back to the bottom of the Separator.
The fuel which is now clean and pure again will ignite better and improves the efficiency and reliability of the engine. The Micro-Separator must be mounted between the fuel tank and the fuel filter and is therefore the first line of defence for the fuel system.
Symptoms which will tell you, that mounting a Micro-Separator is a must to protect your installation:
Diesel fuel spreading a sulphuric smell (smell of rotten eggs), fuel is dark coloured, ‘muddy’ and slimy, the engine is not responding immediately, corrosion in fuel tank and other components and/or fuel filters and fuel system is clogged.

– The MFC-1900 is supplied with 1″ female thread.
– Suitable for diesel engines from up to 600 hp (common rail engines max 400 hp)
– The filter is placed in front of the normal fuel supply.
– Diameter: 135.00 mm

Properties Micro-Separator:

– Tests show that as much as 99.99% of the free water is removed from the fuel.
– Collects all sludge (strings of bacteria) in the bottom part of the separator, thus preventing that this ends up in the diesel filter or engine.
– Removes contaminating particles to a particle size of 75 µm (microns).
No rotating parts
– Once mounted, the Micro Separator will last an (engine) life time (you will have 5 years warranty!)
– No insert filters to replace.
– Filters out even sand and corroded particles, thus protecting the engine.
– The fuel tank is rinsed with cleaned fuel, which improves the condition of the fuel and the tank wall.

Specifications:
Connection: 1″
Smart magnetic stabilizer: MFS-1900
Flow: 3600 l/hour (in combination with the MFS-1900 stabilizer max. 1900 l/hour)
Pipe length (without cranes): 570.00 mm
Diameter: 135.00 mm
Weight: 13kg
For voorkamer diesel max. PK: 600 PK
For common rail diesel max. PK: 400 PK
Max. tank capacity: 3000 liters