Relay 12V Solenoid 100A / 800A

Electrical specifications
Voltage: 12
Ampere: 100 (not continuous use)
Intermittent load: 800A

Physical specifications
B Total length mm: 54.30
Bracket
M Coil bolt: M8
D Outer diameter cover mm: 48.95
G B+: M8
H Length/B+: 14.25
K Term. 50/mm: M5
N Coil bolt: 14.10
L Width/term. 50: 9.70
No. of terminals: 3
Further information
Remarks: 3.95-4.15 coil resistance.
Drawing: No12
Diagram 133855b

The relay is switched by means of contact “S”, earth runs through the base plate.

Replacing
15-283 PRESTOLITE
15-298 PRESTOLITE
15-335 PRESTOLITE
15-365 PRESTOLITE
15-393 PRESTOLITE
15-471 PRESTOLITE
15-472 PRESTOLITE
172869 OMC
89-76545 MERCURY MARINE
am30182 JOHN DEERE
SAZ-4201AC PRESTOLITE
SAZ-4201AJ PRESTOLITE
SAZ-4201ANY PRESTOLITE
SAZ-4201BA PRESTOLITE
SAZ-4201BH PRESTOLITE
SAZ-4201CA PRESTOLITE
SAZ-4201E PRESTOLITE
SAZ-4201ELY PRESTOLITE
SAZ-4201ENY PRESTOLITE
SAZ-4201R PRESTOLITE
SAZ-4201X PRESTOLITE

The electrical switching and operating relays are common parts in electrical motor and installation systems. Electrical relays are used to switch large or different currents on or off via a relatively small current, often as a multiple of the control current. This is to eliminate heavy cables and to avoid unnecessary strain on contacts. In fact, a small switch is used to switch on a larger one by means of a magnetic coil and a contact.

The contacts are made of copper or silver. Silver contacts are more suitable to handle high currents.

As a rule, the control voltage used to turn on the relay is mentioned first, e.g. 6V, 12V, or 24V. This is followed by the maximum current in amperes to turn on the relay.

A so-called mini relay can usually only switch on a maximum current without surges. As the names suggests, operating and high-power relays are more designed for heavier jobs, often indicated with a second maximum amperage (short/long.) For example, by switching a motor on, a power surge will occur for a short period of time.

Please do not hesitate to contact us for any further questions on the operation or the use of a relay.