Coolant Non-Toxic -45 Burst

Description

Coolant Non-Toxic -45 Burst – instructions for use:

• Open all hot and cold taps and drainage outlets
• Fully drain the drinking water system (evacuate it using compressed air if needed)
• Completely drain hot water tank
• Connect hot water tank inlet pipe and outlet pipe together
• Add Coolant Non-Toxic -45 Burst to system, undiluted
• Apply pressure to system by switching on water pump
• Open each tap one by one until coolant comes out and then close it
• Completely drain toilet and cistern and then fill with coolant
• Activate pump handle several times until coolant is visible

Please note! When returning the drinking water system to normal use, flush through completely for at least half an hour until no coloured liquid is left in the system.