Impeller pump Cummins marine 6C/270-450HP Cooling water pump

Description

This Cummins marine 6C/270-450HP cooling water pump is the ideal replacement for your worn out original Cummins outside water pump.
It forms the heart of your marine engine and provides a continuous flow of cool water. So that the engine temperature is adequate and consistent with the demanding engine performance.
Sherwood pumps are of excellent quality and have a very good reputation.

Quality:
Sherwood is one of the largest suppliers of cooling pumps with flexible rubber impellers for marine engines in the US.
Due to their excellent quality, these Sherwood pumps are often installed as standard by American engine manufacturers.
These pumps can be found on some of the most famous engine brands in both pleasure and commercial sailing.

Maintenance:
Inspect the impeller every now and then to maintain the quality of this Cummins marine 6C/270-450HP impeller pump.
To prevent damage to the engine, it is important that the cooling pump of your boat engine or generator works properly.
It is good practice to check daily that sufficient cooling water is leaving the exhaust.
Regular preventive maintenance increases reliability.
It is preferable to replace the impeller of Sherwood engine cooling pumps every 3-12 months, depending on the application.

Product information and specifications:
Drive type: Gear wheel
Model: P1727C
Connection type: Flange (1 3/4″)
Mounting method: Flange (Mounting flange is tilted 16 degrees to the pump body.
Replacing impeller: 7600K-01
Replacing Sherwood pump(s) P1727, P1727-04, P1727A, P1727FB, P1727FB-01, P1727FB-02 & P1727X
Replacing original Cummins pumps with number: Cummins 3897194
Is applied to the following engines with type designation: 6CT, 6CTA8.3M (JWAC), 6CTA8.3M2, & QSC engines

What is included:
This new delivered pump is equipped with a spigot-driven flexible impeller.
However, it is recommended to replace them. The new pumps are fitted with an impeller at the factory.
It may be that the impeller has dried out.

Typical applications for the Sherwood pump are: Cummins C-series engines up to 450hp, as replacement for Cummins-pump 3897194, 3964767.
This is a real Sherwood P1727C flange-mounted cooling pump for boat engines, which uses the pumping in of outside water (river water or seawater) to cool the engine.