Impeller pump Major Kit Perkins Caterpillar

Description

Impeller pump Major Kit Perkins Caterpillar. Pump parts for cooling water pumps with the following engine type: Caterpillar C 4.4 and Perkins M92B

Impeller / Cooling water JPR-CT0440, OEM Caterpillar Pump 4255412, 425-5412, Jabsco 29630-1201
Major Service Kit for the CT0440 contains (all internal parts):
BER0035 (BEARING) 2x
CAMSET0039 (CAM SET) 1x
BOL0080 (SCREWS END COVER) 4x
7400-01 (Impeller) 1x
MCSSET0008 (MECHANICAL SEALING KIT) 1x

Note: MCSSET0008 can only be used for maintenance of JPR-CT0440 cooling water pump.
If using kit JSK0143 to repair OEM pump, use original CAT mechanical seal p/n 4204328 instead of MCSSET0008. The gasket in this kit is thicker than OEM Seal (p/n 4204328).

COV0047 (END COVER PLATE) 1x
ORG0067 (O-RING, END COVER) 1x
ORG0044 (O-RING, CRANK) 1x
ORG0057 (O-RING, MOUNTING) 1x
RET0013 (OIL SEAL, MOUNTING) 1x
SHA0158 (SHAFT) 1x
SNP0006 (SNAP RING, SMALL) 1x
SNP0010 (SNAP RING, BIG) 1x
SPC0019 (SPACER) 1x
WER0029 (WEAR PLATE) 1x
JSK0143 Ca. 1.40 kg
This kit can be used for the following cooling water pumps:
Pump: JPR-CT0440
Caterpillar-pump p/n: 4255412, 425-5412
Jabsco pump p/n: 29630-1201
Jabsco-pump p/n: 29630-1101 (see Note)
Check whether your pump gear has the same number of teeth, namely 33, which corresponds to CT0440
CT0440 good for motorcycle models: C4.4
For questions about this impeller pump, its parts or its type or application, please contact us.
There may be several types or numbers that are also comparable to this type of cooling pump.