Pre-glow Flame start set for difficult to start engines
Flame start set.
Copper pipe 5.00mm + compression fittings between storage tank and flame starter
Flame start thread 7/8 “UNF
Electric pre-glow device that is placed in the air intake and creates a flame to increase the intake temperature for difficult to start engines.
Or engines without an incandescent device or possibility.
By applying voltage to the flame starter, the coil heats up; once it is red-hot, a bi-metal opens a valve and the contents of the overflow tank run over the hot coil and ignite. The storage tank is placed between the return of the atomiser and the tank. The upper connection goes back to the tank.
The lower connection goes to the flame starter. The storage tank should be placed above the level of the pre-glow device.
Product ID: 46231