Volvo Penta tie bar SX/DP-S, 660-1040 mm – 3841706

Description

Product info:
The force required to steer a boat equipped with a hydraulic steering system is inversely proportional to the number of steering wheel turns from lock to lock. The steering wheel turns are determined by the ratio between the cylinder volume, pump displacement and free movement of the steering system, for example the rudder. A large cylinder volume and a small pump displacement result in a higher number of steering wheel turns, while a small cylinder volume and a large pump displacement result in fewer steering wheel turns. Fewer steering wheel turns means a faster steering response, but more effort is required, while more steering wheel turns means a slower steering response but less effort. The hydraulic steering pumps are available in three different displacements: 28 cc, 33 cc and 39 cc. Each is available for three different mounting methods: front mounting, rear mounting and tilt mounting. Three steering cylinders are available, all for rudder installations, with volumes of 116 cc, 168 cc and 215 cc respectively.

Suitable for:
Volvo Penta TSK-A-42-NPT
Volvo Penta TSK-A-AC-32-NPT
Volvo Penta TSK-A-AC-42-NPT
Volvo Penta TSK-A-AC-52-NPT
Volvo Penta TSK-B-AC-42-NPT
Volvo Penta TSK-B-AC-52-NPT
Volvo Penta TSK-C-32
Volvo Penta TSK-C-32-NPT
Volvo Penta TSK-C-42-NPT
Volvo Penta TSK-C-52
Volvo Penta TSK-C-52-NPT
Volvo Penta TSK-C-AC-32
Volvo Penta TSK-C-AC-32-NPT
Volvo Penta TSK-C-AC-42
Volvo Penta TSK-C-AC-42-NPT
Volvo Penta TSK-C-AC-52
Volvo Penta TSK-C-AC-52-NPT
Volvo Penta TSK-C-OX-32
Volvo Penta TSK-C-OX-42
Volvo Penta TSK-C-OX-52