Description
Solé Diesel V-belt for Mini-50
This genuine Solé Diesel V-belt is specifically intended for the Solé Mini-50 marine diesel engine. The belt transfers the rotational movement of the engine to the alternator and the internal cooling water pump.
The V-belt therefore performs an important function within both the electrical system and the engine cooling system. A correctly tensioned and undamaged belt ensures that both components are driven reliably while the engine is running.
Technical specifications
Brand: Solé Diesel
Product type: V-belt
Part number: 22.16127013
Suitable for: Solé Diesel Mini-50
Function: Drives the alternator and internal cooling water pump
Suitable for Solé Diesel Mini-50
This V-belt is specifically intended for the Solé Diesel Mini-50. This is a 4-cylinder marine diesel engine based on a Mitsubishi engine and belongs to the older Solé Diesel engine series.
Because other Solé Mini engines may use different belt lengths and drive configurations, it is important to check the exact engine type before ordering the V-belt.
Alternator drive
The V-belt drives the alternator via the engine pulleys. While the engine is running, the alternator supplies electrical power for charging the batteries and the onboard electrical system.
If the belt is too loose or worn, it may slip on the pulley. This can prevent the alternator from reaching sufficient speed and may reduce charging performance.
Internal cooling water pump drive
The V-belt also drives the internal cooling water pump. This pump circulates coolant through the closed engine cooling system and is therefore important for dissipating engine heat.
If the belt slips excessively or breaks, coolant circulation may decrease or stop completely. This can cause the engine temperature to rise quickly and create a risk of overheating.
V-belt wear
A V-belt is a wear part that is continuously bent and loaded during operation. Heat, friction and ageing can cause the rubber to stretch, dry out or become damaged.
Check for, among other things:
Dry cracks in the rubber
Fraying or damaged edges
A smooth or worn running surface
Insufficient belt tension
Squealing or slipping during operation
A belt that can no longer be tensioned correctly
Checking belt tension
The V-belt can be retensioned during regular maintenance if it has stretched slightly through use. Correct belt tension is important to transfer the drive to the alternator and cooling water pump without slipping.
A belt that is too loose can slip and transfer insufficient power. A belt that is tensioned too tightly can place additional load on the bearings of the alternator, cooling water pump and other drive components.
When should it be replaced?
Replace the V-belt when dry cracks, fraying, clear wear or other damage are visible. Replacement is also necessary if the belt can no longer be tensioned correctly or continues to slip during operation.
Regular inspection during engine maintenance helps prevent unexpected belt failure that could disrupt both battery charging and engine cooling.
Spare V-belt on board
A suitable spare V-belt takes up little space and is therefore a practical spare part to keep on board. In the event of an unexpected breakage, the drive of the alternator and cooling water pump can be restored more quickly.



Reviews
There are no reviews yet.