LD wiper switch 12/24V for 215BD

Description

LD wiper switch for 215BD

This LD wiper switch allows you to operate one wiper motor in the 215BD wiper system. The complete set consists of a switch, a control knob with a wiper symbol and a mounting frame. This allows you to neatly install the controls in your boat’s dashboard.

Wiper operation

A suitable wiper switch is important for reliable operation of the wiper system. The switch allows you to operate the connected wiper system from the dashboard.

The available wiping modes and any additional functions depend on the version of the wiper motor and the electrical connection. Therefore, check the wiring diagram for the motor and switch beforehand.

Suitable for 12V and 24V installations

This wiper switch is suitable for 12V and 24V DC installations. The maximum current rating is 4A. Check that the electrical load of the connected wiper motor remains within this limit.

The electrical connection must match the wiring diagram of the installation. Take into account the required electrical protection, cable cross-section and motor connections. Disconnect the power supply before carrying out any work on the wiring.

Installation and mounting

The set includes a switch, control knob and mounting frame for installation in the dashboard. Check the available space and the dimensions of the switch beforehand to ensure correct installation.

The product dimensions are 21 mm wide, 79 mm deep and 91 mm high. The specified installation dimensions are 21 mm wide, 99 mm deep and 12 mm high. Allow sufficient space for the connections and wiring behind the dashboard during installation.

After installation, check that the switch is securely mounted, the wiring is correctly connected and the wiper motor responds properly to the controls.

Compatibility

This wiper switch is designed for the LD 215BD wiper system and the operation of one wiper. When replacing a switch, check the motor type, supply voltage, electrical connections and maximum current rating of the existing installation.

The correct combination of switch, motor and wiring ensures convenient and reliable operation of the wiper system.

Related products

Wiper motor: Combine this switch with a suitable LD 215BD 24V wiper motor with 25 mm shaft. For 12V installations, an LD 215BD 12V wiper motor with 25 mm shaft is also available. Check that the supply voltage, shaft version and electrical load match your installation.

Wiper arms and blades: Browse the range of wipers and parts for compatible wiper arms and blades. Choose the correct arm version and blade length based on the dimensions of the vessel’s windscreen and the required wiping range.

The LD series includes a 330-450 mm single wiper arm, a 450-600 mm single wiper arm and a 450-600 mm pantograph wiper arm.

Various LD wiper blades are available for these arms, including a 300 mm wiper blade, a 450 mm wiper blade and a 600 mm wiper blade. Always check that the selected combination is suitable for the vessel’s windscreen.

Technical specifications

Series: LD
Suitable for: LD 215BD
Number of wipers: 1
Voltage: 12/24V DC
Maximum current rating: 4A
Sensitivity: 20 mA
Colour: Black
Product width: 21 mm
Product depth: 79 mm
Product height: 91 mm
Installation width: 21 mm
Installation depth: 99 mm
Installation height: 12 mm