Engine mount set Lister stw2


Warranty: 2 Years

Maximum load per mount 100 kg.
Rubber hardness 65 shore.
4x 10-IM-130-B-65

Adjustment pin M16

A Length: 120 mm
B Height: 34 mm
C Width: 60 mm
D Distance holes: 100 mm

SKU: 4 x100021-65 Categories: ,

Product ID: 119699


This type of engine mount kit Lister stw2 is a set of compact vibration absorbers, easy to mount and offering high vibration isolation.

This engine mount set Lister stw2 is a compact vibration damper. They are easy-to-mount engine mounts and offer high vibration isolation.
The internal buffer of this unique vibration damper ensures that the movement of the motor is limited in three directions.

This type of engine mount is a compact vibration damper with a high damping capacity against large displacements.
Due to its construction and high damping capacity, this type of engine mount is very suitable for e.g. 1, 2 cylinder diesel engines.
Engines with one or two cylinders generally have a larger capacity per cylinder and are sturdier. As a result, vibrations are stronger and have a greater displacement.

Thanks to the integrated swing limitation, shock movements of up to 5G can be reduced.
Annoying vibrations are thus greatly reduced and brought down to a comfortable level when sailing.

The height is adjustable by means of a standard M16 pin. Before ordering, check that this is also the right size for your engine. Your bike already has a history and changes may have been made to the engine struts.
If the hole size is different for your support legs/arms, you have the choice between pin sizes M12 or M18. These can be ordered separately, or if you tell us before ordering we will adjust it.

The right engine mount:
Determining the right engine mount or vibration damper is a science in itself.
If the data of your engine matches one of these: Engine mount set for the Lister stw2, you will be satisfied with the damping these engine mounts provide.
If the data of your engine corresponds to this engine mount set Lister stw2, the rest is an easy ride.

Please note!

While assembling the engine mount, do not forget to place the thick washer between the cover and the thinner locknut.
Without this ring, there is a risk of loosening the adjustment pin or damaging the engine mount.

For questions about this product, its parts or its type or application, please feel free to contact us.


There are no reviews yet.

Show only reviews in English (0)

Be the first to review “Engine mount set Lister stw2”
Project! AB Marine service

Your email address will not be published.