Low voltage disconnector max. 60A PT60 ALFATRONIX

The PowerTector Battery Guard is a solid state battery device that will monitor the source voltage and disconnect the equipment from the battery if the voltage falls below a pre-determined level. This can work to ensure that there is always sufficient voltage remaining in the battery to start a vehicle engine or ensure power is available for other critical applications. The total discharge of a lead acid battery can also cause damage to the cells significantly shortening the life of the battery. The PowerTector unit can also be set to disconnect equipment at a lower voltage that will still protect the battery from total discharge, while allowing for maximum battery usage. A timed version is also available which will disconnect automatically a set period after the ignition has been switched off.

Specifications
Voltage in: 9-32
Regulation: Yes
Alarm voltage: Yes
Shut down voltage: Yes
Overloading: Yes
Overheating: Yes
Short circuit: Yes
Dimensions in mm: 76 x 78 x 33
Weight kg: 0.155
Amp max/cont: 60
Connection: M6
Shut down/12 V: 11.5
Shut down/24 V: 23

200A continuous

66A 110% 10s
120A 200% 1s
180A 300% <0.5ms