Description
MD2 PF parallel wiper arm 900 mm narrow for 240BS wiper systems
The MD2 PF parallel wiper arm is a fixed-length wiper arm for marine wiper systems. This narrow, black-coated version has an arm length of 900 mm and was specifically developed for the 240BS wiper motor from the MD2 series.
The parallel wiper arm has two mounting points with a centre-to-centre distance of 60 mm. Thanks to the parallel design, the wiper blade remains in approximately the same orientation throughout the movement. This provides a consistent wiping area on the marine window.
The arm is made from 316 stainless steel and features seawater-resistant bronze arm heads. The black protective coating helps reduce distracting reflections. This narrow version is suitable for wiper blades from 300 to 800 mm.
Fixed-length PF parallel wiper arm for the 240BS wiper motor
This MD2 PF parallel wiper arm was developed for the 240BS wiper system. The corresponding wiper motor has two driven shafts that work together to produce the parallel wiping movement.
The centre-to-centre distance between the mounting points is 60 mm. This dimension matches the shaft spacing of the 240BS wiper motor.
As both arms work together, the wiper blade remains in approximately the same orientation throughout the movement. This creates a more rectangular wiping area than a conventional single pivoting wiper arm.
This design is particularly suitable for larger marine windows where a wide and consistent wiping area is required, for example on motor yachts, workboats and other vessels.
The parallel wiper arm can be combined with suitable 240BS wiper motors in both 12V and 24V versions. The electrical voltage is determined by the motor and does not affect the mechanical operation of the arm.
Important: When replacing an existing arm, always check the motor type, centre-to-centre distance and shaft attachments. This MD2 PF parallel wiper arm is not directly interchangeable with an MD1 PU parallel wiper arm.
Fixed arm length of 900 mm
The parallel wiper arm has a fixed length of 900 mm. Unlike adjustable PU parallel wiper arms, this arm length cannot be shortened or extended.
This version has the maximum arm length specified for the 240BS wiper system. Therefore, it is important to check beforehand whether the motor, selected blade length and mounting position are suitable for these dimensions.
The correct arm length is determined by the dimensions of the marine window, the mounting position of the wiper motor, the adjusted sweep angle and the required position of the wiper blade.
An arm that is too long may cause the wiper blade to move beyond the window or come into contact with the window frame during operation. An arm that is too short may provide a smaller wiping area than required.
Therefore, before ordering, check whether a fixed arm length of 900 mm is suitable for the existing wiper installation. Take into account the full movement of both arms in the parallel mechanism.
Other fixed-length versions are also available within the same MD2 PF series for installations requiring a shorter arm length.
Narrow version for wiper blades from 300 to 800 mm
This PF parallel wiper arm has a narrow blade attachment and is intended for suitable wiper blades with lengths from 300 to 800 mm.
The narrow version differs from the wide PF parallel wiper arms. The wide versions are intended for larger HD wiper blades from 850 to 900 mm and have a different blade attachment.
Although this parallel wiper arm itself is 900 mm long, the maximum permitted wiper blade length is 800 mm. Arm length and blade length are separate specifications and must not be confused.
The correct combination of arm and wiper blade is important for a consistent wiping movement. The wiper blade must be correctly secured in the blade holder and have sufficient clearance for movement.
The 240BS wiper motor supports suitable wiper arms and blades up to 900 mm. However, the lower maximum blade length of 800 mm applies to this narrow PF parallel wiper arm.
When replacing a wiper blade, check not only its length but also the dimensions and type of connection to the blade holder.
Important: Do not use 850 or 900 mm wiper blades with this narrow version. A suitable wide PF parallel wiper arm is required for these blade lengths.
Two springs with fixed contact pressure
The MD2 PF parallel wiper arm features two springs that provide the contact pressure of the wiper blade against the marine window.
The double-spring design helps maintain even contact between the wiper blade and the glass throughout the movement. This is important for removing rainwater, spray and dirt.
This PF version has fixed spring pressure. Unlike the adjustable MD1 PU parallel wiper arms, the contact pressure is not continuously adjustable.
The spring mechanism is designed for use within the MD2 wiper system. If the wiper blade does not make sufficient contact with the marine window, check the condition of the blade, blade holder, springs and mounting position.
Incorrect blade selection or a worn spring mechanism can result in uneven wiping contact and additional load on the drive mechanism.
Important: Do not attempt to adjust the fixed spring pressure by bending the springs or modifying the arm design. Only use suitable replacement components.
Adjustable blade holder and parallel wiping movement
The MD2 PF parallel wiper arm is equipped with a pivoting blade holder. This allows the position of the wiper blade to be adapted to the shape and position of the marine window.
The adjustable blade holder allows the wiper blade to be positioned correctly relative to the window frame and the required park position.
Where the mounting position permits, the blade holder can be adjusted so that the wiper blade rests parallel to the side of the marine window in its park position.
The parallel design helps keep the wiper blade in approximately the same orientation throughout the movement. This allows a large area of the marine window to be wiped evenly.
The PF parallel wiper arm can also be lifted away from the marine window. This makes it easier to replace the wiper blade, clean the window or carry out maintenance on the arm.
After adjustment, check that the blade remains clear of window edges, seals and other components throughout its full wiping movement.
316 stainless steel with black protective coating
The MD2 PF parallel wiper arm is made from 316 stainless steel and features seawater-resistant bronze arm heads. These materials are suitable for marine applications where components are regularly exposed to moisture, salt and changing weather conditions.
The black protective coating helps reduce distracting reflections from the helm position. The black finish also allows the arm to complement various marine windows and window structures.
Regular maintenance is important for a long service life. After use in a saltwater environment, rinse the external components with fresh water and check the mountings and moving joints.
Also check that the protective coating is intact and that the arm heads and pivot points move freely.
Compatible 240BS wiper motors
This fixed-length PF parallel wiper arm was developed for the MD2 240BS wiper motor. The motor has two driven shafts with a centre-to-centre distance of 60 mm and a maximum torque of 40 Nm.
Compatible motor versions:
The motor determines the electrical voltage, available driving force, sweep angle and parking function. The PF parallel wiper arm forms the mechanical connection between the drive shafts and the wiper blade.
The 240BS supports a maximum arm length of 900 mm. This version reaches that limit. The maximum blade length remains limited to 800 mm due to the narrow arm design.
When replacing an existing arm, check that the motor and adjusted sweep angle are suitable for this fixed 900 mm arm and the selected wiper blade.
Also check that the attachments match the existing installation and that both drive shafts operate correctly together.
Compatible wiper blades
This narrow MD2 PF parallel wiper arm is intended for suitable wiper blades from 300 to 800 mm. The correct blade length depends on the dimensions of the marine window, the mounting position of the motor and the adjusted sweep angle.
HP wiper blades:
- HP wiper blade 300 mm – 2171.HP
- HP wiper blade 350 mm – 2172.HP
- HP wiper blade 400 mm – 2173.HP
- HP wiper blade 450 mm – 2174.HP
- HP wiper blade 500 mm – 2175.HP
- HP wiper blade 550 mm – 2176.HP
- HP wiper blade 600 mm – 2177.HP
- HP wiper blade 650 mm – 2178.HP
- HP wiper blade 700 mm – 2179.HP
- HP wiper blade 750 mm – 2195.HP
- HP wiper blade 800 mm – 2196.HP
HD wiper blades with compatible attachment:
- HD wiper blade 610 mm – 216120
- HD wiper blade 650 mm – 216121
- HD wiper blade 700 mm – 216122
- HD wiper blade 750 mm – 216123
- HD wiper blade 800 mm – 216124
The listed blade versions are examples from the marine range. Check each wiper blade to ensure its attachment is suitable for the narrow PF blade holder.
The maximum permitted blade length for this arm is 800 mm. Do not use a longer wiper blade than permitted, even if the wiper motor supports a greater blade length.
A longer wiper blade does not automatically provide better wiping performance. The blade must remain clear of window edges and other components throughout its full wiping movement.
Important: Before ordering, check the length, blade attachment and available space. Wiper blades of 850 and 900 mm are intended for a suitable wide PF parallel wiper arm and are not designed for this narrow version.
Other versions within the MD2 PF series
Various fixed-length parallel wiper arms are available within the MD2 PF series. The correct version depends on the required arm length, blade attachment and desired finish.
Narrow black PF parallel wiper arms:
- MD2 PF parallel wiper arm fixed 800 mm narrow black – 2140.800.S
- MD2 PF parallel wiper arm fixed 850 mm narrow black – 2140.850.S
- MD2 PF parallel wiper arm fixed 900 mm narrow black – 2140.900.S
Wide black PF parallel wiper arms:
- MD2 PF parallel wiper arm fixed 750 mm wide black – 2140.750.B
- MD2 PF parallel wiper arm fixed 800 mm wide black – 2140.800.B
- MD2 PF parallel wiper arm fixed 850 mm wide black – 2140.850.B
- MD2 PF parallel wiper arm fixed 900 mm wide black – 2140.900.B
Polished PF parallel wiper arms:
- MD2 PF parallel wiper arm fixed 800 mm narrow polished – 2140.800.SP
- MD2 PF parallel wiper arm fixed 800 mm wide polished – 2140.800.BP
- MD2 PF parallel wiper arm fixed 850 mm narrow polished – 2140.850.SP
- MD2 PF parallel wiper arm fixed 850 mm wide polished – 2140.850.BP
- MD2 PF parallel wiper arm fixed 900 mm narrow polished – 2140.900.SP
- MD2 PF parallel wiper arm fixed 900 mm wide polished – 2140.900.BP
The narrow PF versions are intended for suitable wiper blades from 300 to 800 mm. The wide versions are intended for HD wiper blades from 850 to 900 mm.
The different arm lengths and blade attachments are not automatically interchangeable. Therefore, check which version is required for the existing installation before ordering.
Optional windscreen washers
Additional washer nozzles are available for suitable marine wiper systems. These allow washer fluid to be directed onto the marine window, making it easier to remove dirt and salt deposits.
Available washer nozzles for suitable installations:
- Washer nozzle with 4 spray jets, right – 2185
- Washer nozzle with 4 spray jets, left – 2185L
- Washer nozzle with 6 spray jets – 2111.CPL
When selecting a washer nozzle, check that it is suitable for the PF parallel wiper arm used. Not every washer nozzle has the same attachment.
A complete windscreen washer installation also requires a suitable pump, hoses, water supply and control system.
Maintenance and replacement
Regularly inspect the MD2 PF parallel wiper arm for wear, damage and loose mountings. Pay particular attention to the arm heads, the two springs, blade holder and connections to the drive shafts.
If the wiper blade leaves streaks or does not remove sufficient water, check the condition of the blade, attachment and spring mechanism.
Avoid operating the wiper on a dry window whenever possible. This can cause additional wear to the wiper blade and drive mechanism.
After replacing a wiper blade, check that the blade holder is correctly adjusted and that the blade can move freely throughout its full wiping movement.
When replacing an existing parallel wiper arm, the arm type, fixed arm length, centre-to-centre distance, blade attachment and motor type must match.
This fixed-length PF parallel wiper arm is not directly interchangeable with adjustable PU parallel wiper arms from the MD1 series.
Important: Before installation, check that the parallel wiper arm is correctly attached to both drive shafts and maintains sufficient clearance from the motor housing and window edges. Also check that the selected blade length does not exceed 800 mm and is suitable for the motor used.
Downloads
Technical information MD2 PF parallel wiper arms (PDF) – Overview of PF arm versions, material specifications, arm lengths, blade lengths and technical features.





Reviews
There are no reviews yet.