Impeller Pumps

Showing 529–552 of 1187 results

Buying an impeller

The impeller is an important part of the cooling system. An impeller rotates in the impeller pump, the rubbers of the impeller run against the edge of the impeller pump housing (cooling water pump). They create a suction force that draws in the water. The impeller should be replaced every few years and preferably removed during the winter break. Then the impeller will last longer. You can buy an impeller directly here.

Step-by-step instructions for cleaning or replacing the impeller (cooling water system for inboard motors)

Step-by-step instructions for replacing the impeller pump:

Close the outboard valve.
Open the pump housing cover (a round sealing plate). Some water may come out of the pump, but that is not a problem.
Wet the gasket a little and take it out without tearing it.
Remember the direction of rotation of the impeller.
Remove the impeller.
Check the pump housing for rubber fragments.
Lubricate the impeller and gasket with acid-free petroleum jelly.
Place the impeller and gasket back in the pump housing.
Open the outboard valve, start the engine and check that cooling water is coming out.

Showing 529–552 of 1187 results

Impeller Pumps

SH24074 Cover

SH24073 Wear plate

SH24017 Lip seal double

SH23980 Minor repair kit

SH23979 Minor repair kit

SH23977 Kit major repair

SH23976 Minor repair kit

SH23975 Major Repair kit

SH23974 Major repair kit

SH23973 Minor repair kit

SH23972 Minor repair kit

SH23837 Seal mechanical (silicon carbide)

SH23448 Ball bearing

SH22836 Wear plate

SH22768 Wear plate

SH22767 Cover plate

SH22117S Seal/seat assembly

SH22000K Impeller kit

SH21988 Port 2″ OD

SH21751 Lip seal

SH21573 Lock washer

SH21570 Gasket end cover

SH21533 Cam liner half

SH21525 ‘O’ ring for flanged connection

Buying an impeller

Step-by-step instructions for cleaning or replacing the impeller (cooling water system for inboard motors)

Select a Pickup Point